|Disinfectant CleanerPolymeric Sealer Sealer Remover Self-Shining Silicone Floor, Bathroom and Porcelain Stain Remover Gemalin Gel Car ShampooSelf-Shining WaxEmulsioned Wax Dishwasher Soap Clothing Softener Liquid Detergent for Washing Machiness Carpet and Furniture Shampoo Multiuse Industrial Liquid Detergent Iodized Soap Glass-cleanerFreshener Disinfectant Whitener Disinfectant
DESCRIPTION:
This sealer leaves a hard film on the surface. Suitable to protect against wear, it's anti-sliding, shinny and lasting. Suitable to apply on these kinds of floors: granite, wood, marble, tiles, rubber and vinyl. Do not apply on ceramic nor vitrified floors, because there is no adherence. It's easy to apply and to keep, and very footsteps-resistant. It's also water-resistant which allows the cleaning of the surface without removing the product. It does not lose its colour over time.
TECHNICAL SPECIFICATIONS:
- APPEARANCE: Non-viscous water-like liquid
- PH: 8.0 - 9.0
- VISCOSITY: Free
- COLOUR: Milky white
- FRAGANCE: Characteristic
APPLICATION METHODS:
Before applying, clean the surface using a wax remover and water. Avoid leaving any rests of remover over the surface.
- NEW FLOORS:
On new floors apply several thin and even layers until you get a good shinny effect. Each layer must be applied perpendicular to the one before and you must allow a minimum of 30 minutes between layer and layer (this may depend on weather conditions). No maintenance should be done until 48 hours later (this recommendation should be followed for all kind of applications and floors).
- NORMAL FLOORS: Apply thin and even layers on dry floor. A minimum of 3 layers is recommended to get better results. Firs layer must be diluted 1:1.
- OLD AND POROUS FLOORS: Apply as many thin and even layers as needed, until you get a good shinny effect. Allow the layers to dry for a minimum of 30 minutes. We recommend to do the maintenance using a half-wet cloth. Avoid using any whitening and cleaning products. If the floor is very dirty, you can use a neutral soap (Multiuse) to clean it up . After that, rinse it and dry it very well.
If due to footsteps the film wears thin or looses its shine somewhere, apply a new layer of the product in that area.
SAFETY PRECAUTIONS:
Keep away from children. If you do not wish to contaminate the product, do not place the surplus back into the container.
PRESENTATION:
2000 cc, 4000 cc or 20000 cc container